Compex Technologies NetPassage 15B - Manual (Page 17)

Chapter 2 Getting Started
10
Press on the Obtain an IP
address automatically radio
button and press the OK
button.
Figure 2.2.1-4
Network Configuration
Window
5. Press the OK button again to close the network configuration window. The new
network configuration will be registered on your network card.
2.2.2 Configuring your Computer with Static IP Address
If you have chosen to configure your computer with Static IP address, please take note
of the following default settings on NetPassage 15B.
IP (LAN): 192.168.168.1
Netmask: 255.255.255.0
To log on to the Web-based Configuration Interface of NetPassage 15B and to surf the
Internet, you need to configure your computer with the following network settings:
IP: 192.168.168.X
Subnet Mask: 255.255.255.0
Gateway: 192.168.168.1
DNS Server: <IP address of DNS server>
X is any integer from 2 to 254, and you cannot configure more than one
computer with the same IP address.
<IP address of DNS server> is the IP address of a DNS server. This
information is usually provided by your broadband Internet service
provider.
NOTE
NetPassage 15B is pre-configured with a subnet of 192.168.168.0. If you
wish to configure your network with another subnet, you may do so after
logging on to the configuration interface of NetPassage 15B.
For Microsoft Windows 95/98/ME
1. Open the Control Panel from the Start menu