Compex Technologies NetPassage 15B - Manual (Page 24)

Chapter 3 Configuring NetPassage 15B
17
Chapter 3 Configuring NetPassage 15B
This chapter explains the features of NetPassage 15B in sections and how to implement them.
3.1 Setting up your LAN
Compex NetPassage 15B is pre-configured with a default IP address 192.168.168.1 with
a network mask of 255.255.255.0. By default, the DHCP Server has also been pre-
configured to assign IP addresses starting from 192.168.168.100 to 192.168.168.254. If
you do not wish to use these for your network, you may change these settings.
3.1.1 Configuring IP Addressing
If you wish to modify the IP addressing of your NetPassage 15B, you may do so in the
web-based configuration interface.
1. Log on to the web-based configuration interface of NetPassage 15B with a web
browser.
2. Click on the LAN Setup URL from the Command Menu and the LAN setup
window shall appear, as shown in Figure 3.1.1-1
Figure 3.1.1-1
LAN Setup
3. Fill in the parameters in the respective text boxes:
IP Address This is the IP address of your NetPassage 15B
Network Mask This is the Network Mask of your NetPassage 15B’s IP
address. It decides the subnet of your NetPassage 15B.
For example, if the IP address and network mask of
your NetPassage 15B is 192.168.168.1 and
255.255.255.0 respectively, the subnet of your
NetPassage 15B is 192.168.168.0.