Compex Technologies NetPassage 15B - Manual (Page 37)

Chapter 3 Configuring NetPassage 15B
30
4. For Known Server, select the Server Type from the drop down menu and specify
the private IP address of your Virtual Server.
For Custom Server, specify the IP address of the Virtual Server, select the
Protocol used by this application from the drop down menu, specify the TCP/UDP
port used by this application, and enter your preferred reference name in the Server
Type field.
5. Press the Add button to add this new Virtual Server into the list.
6. Press the
Save or Reset Settings URL from the Command Menu and press the
Save button.
3.3.3 Defining Virtual Server based on IP Forwarding
If you have configured your NetPassage 15B with Static IP WAN type, you have the
option to define Virtual Server based on IP Forwarding.
1. Click on the NAT URL from the Command Menu and the NAT configuration page
will be displayed, as shown in Figure 3.3.3-1.
Figure 3.3.3-1
NAT Configuration
Window for Static IP
WAN Type
2. Press the Static Ip Address Entries button and the list of defined Virtual Server
will be displayed, as shown in Figure 3.3.3-2.
Figure 3.3.3-2
Table Showing Defined
Virtual Server based on IP
Forwarding
3. Press the Add button to define new Virtual Server, as shown in Figure 3.3.3-3.