Notice for the customers in the u. s. a, Notice for the customers in canada, Warning – Sony LBT-G1300 User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

WARNING

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.

Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.

Laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.

This appliance is classified
as a CLASS! LASER
product. The CLASS 1
LASER PRODUCT
MARKING is located on
the rear exterior.

CLASS 1LAS6R PRODUCT

I

LUOKAN UASEnLArTE

I

KLASS nASERAPMUr ■

This caution label is located inside the unit.

CMmoN

■ >wu LAaei n*eunON

wmbi

om

moo CXFOMW TO BEAM.

AEVARSEL

urmua lAarniMuNn

vcd

abnmo

n

A

k

aKKEAHEoMFMVDeii a tcc

af

fvnfrxM

UtmoA UO* STTtUi FOR

str

N

jmi

.

VAHOI

AMTWfWA M aUOWlWTUS OHREm^MA

DUrr N.TTWM lAKRUTCLVUX.

VARNINQ

LASEMNlAUNa MR OBM* OCL AR ORPNAO

ocH »A

mi

ar

uRmpfLAo

ALVMISEL

MYNUO LAMNSTRALMO

m

A

r

OCKSe. A

pws

IMNOA EK8PCWEWO FOR amALBl

NOTICE FOR THE CUSTOMERS IN

THE U. S. A.

A

FUSKOFELECTMC SHOCK |

CAUTtON . TO REOUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER <Ofl BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICINa TO OUALIREO SERVICE PERSONNEL

This symbol is intended to alert
the user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.

This symbol is intended to alert

the user to the presence of
important operating and
maintenance (servicing)
instruchons in the literature
accompanying the appliance.

The use of optical instruments with this product will
increase eye hazard.

INFORMATION

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and
on, the user is encouraged to try to correcl the
interference

by

one or more of the following

measures:

— Reorient or relocate the receiving anterma.
— Increase the separation between the equipment

and receiver.

— Connect the equipment into an outlet on a

circuit different from that to which the receiver
is cormected.

— Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.

Note on CATV system Installer:

This reminder is provided to call CATV system

installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.

NOTICE FOR THE CUSTOMERS IN
CANADA

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE
THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.

CAUTION

Advertising