Sony TC-WE305 - Manual (Page 2)

Read This First
WARNING
To prevent fire or shock
hazard, do not expose
the unit to rain or
moisture.
For the customers in the
United States
A
!K Of fLECTRIC SMOCK
A
CAimON TO H60OCE THE RISK Of ELECTRIC SMOCK.
DO WOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUAUFIEO SERVICE PERSONNEL
CAUTION
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority
to operate this equipment.
For the customers in Canada
CAUTION
TO PREVENT ELECTRIC SHOCK, DO
NOT USE THIS POLARIZED AC PLUG
WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE
EXPOSURE.
A
This symbol is intended to alert the user
to the presence of uninsulated
"dangerous voltage" within the
product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
Owner's Record
The model and serial numbers are
located on the rear of the unit.
Record the serial number in the space
provided below. Refer to them
whenever you call upon your Sony
dealer regarding this product.
Model No. TC-WE305
Serial No.______________
Unpacking
Check that you received the
following items:
• Audio connecting cords (2)
Hooking Up the
System
This section describes how to hook
up the tape deck to an amplifier. Be
sure to turn off the power of each
component before making the
connections.
TC-WE305
U
I
to LINE IN
I
to LINE OUT
to an AC
to a
wall outlet
Hookups
When connecting an audio
connecting cord, be sure to match
the color-coded cord to the
appropriate jacks on the
components: Red (right) to Red and
White (left) to White. Be sure to
make connections firmly to avoid
hum and noise.
Connect the tape deck to the
amplifier as shown below.
Tape deck Amplifier
LINE
IN OUT
TAPE
IN REC OUT
-trty
H
Connecting the AC power
cord
Connect the AC power cord to an
AC outlet.