Sony TC-WE305 - Manual (Page 3)

Basic Operations
Playing a Tape
2
See “Hooking Up the
System" for hookup
information.
You can use either deck for
playback.
Q To play a tape recorded
with the Dolby NR system
Set DOLBY NR to ON.
1 Turn on the amplifier and select the tape deck position.
Press POWER, and then press ■ =
and insert a cassette.
With the side you want to play
facing you
Set TAPE TYPE on the deck you use.
When the tape type
Set TAPE TYPE on
you use is
DECK A to DECK B to
TYPE I TYPE I TYPE I
TYPE II TYPE II/IV TYPE II
TYPE IV TYPE II/IV TYPE IV
Press O.
The deck starts playing. Adjust the volume on the amplifier.
Do not press POWER or while the tape deck is
operating. If you do so, the tape may be damaged.
To Press
Stop playing
Pause PAUSE II. Press the button again to
resume play.
Fast-forward or rewind ►► or ◄◄ when the deck is stopped
Take out the cassette ■ = after stopping playing