Sony MZ-N707 - Manual (Page 23)

Create a group folder by clicking [New Group] in the Device/Media window and then
drag and drop the desired checked-out songs onto the group folder. The songs will be
registered to the group, allowing them to be played back using the group function.
Queuing and repeat play can now be performed for only the tracks within the group.
Once created, groups can be checked in and checked out.
TransferringVonWiron™ -,
c o m p u t S t a « d c - i n ) r - . ; i t f e !
You can return the tracks recorded on the Net MD back to the hard drive of your
computer (Check-In). You can return them only to the same computer from which the
tracks were checked-out.
O
TJ
a
1
Run OpenMG Jukebox, and click [Check-In/Out] tab to display the
Check-In/Out window.
Your computer recognizes the connected Net MD and the list of songs is displayed
on the right side of the window.
2
Click the song to be checked-in from the song list of the Net MD.
To check-in more than one song at a time, hold down the Ctrl key and click the
songs to be selected.
3
Click ® (Check-In).
Check-in starts.
Notes
• If you want to check-in all the songs, click (In All). All the songs that can be returned in
the Net MD are checked-in.
• You can set to "1 step mode” or ”2 step mode" for checking-in.
In ”2 step mode," click (Start) button after selecting the songs. Refer to "Transferring
songs from the computer to your Net MD (Check-out)" in the online Help for details.
To stop check-in
Click (Stop).
Notes
• Once check-in has started, do not disconnect the USB cable or power source until the check­
in operation completes. Doing so may damage the data or cause malfunction.
• Make sure not to bump the Net MD or disconnect the power cord after check-in has started.
23