Sony STR-AV1070X - Manual (Page 25)

Adding New Sound on a Video Jape during Video Editing
During video tape editing, you can add the desired sound on the recording-side video tape from various audio program
sources.
With the STR-AV1070X
POWER -*■ ON
^ Video signals
t=> Audio signals
VCR 2 I 2, 3, 6
VCR 1 6
to VIDEO 2
VIDEO IN
t| to VIDEO 1
VIDEO OUT/
AUDIO OUT
Og
= ^
r ' ----- ^— '
1 Press EDIT VIDEO to select the playback side VCR.
2c> 1 or 3> 1 will appear in the VIDEO EDIT display
area
2t>V. forVCR2
3t> 1: for VCR 3
2 Insert a recorded video tape into the playback-side
VCR and set the VCR to the playback mode.
3 At the point where audio dubbing is to start, press
the PAUSE button on the playback-side VCR.
4 Press EDIT AUDIO.
AUDIO indicator appears.
5 Select the audio program source with the
FUNCTION selectors.
6 Release the pause mode of the playback-side
VCR and set VCR 1 to the recording mode.
7 Start the selected audio program source.
Audio dubbing will start.
25