Specifications, Audio power specifications, Other specifications – Sony STR-AV1070X User Manual

Page 38: Power output and total harmonic distortion, Amplifier section

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Specifications

Audio Power Specifications

Other Specifications

POWER OUTPUT AND TOTAL HARMONIC DISTORTION

With 8-ohm load, both channels driven, from 20 - 20,000

Hz, rated 120 watts (STR-AV1070X) or 100 watts (STR-
AV970X) per channel minimum RMS power, with no
more than 0.015% (STR-AV1070X) or 0.03% (STR-
AV970X) total harmonic distortion from 250 milliwatts to
rated output.

Amplifier section

STR-AV1070X

STR-AV970X

Dynamic power
output

8 ohms, at 1
kHz IHF

195 + 195

watts

140+140

watts

4 ohms, at 1
kHz IHF

250 + 250
watts

190 T 190

watts

Harmonic distortion at rated
output

Less than
0.015%

Less than
0.03%

Intermodulation (IM) distortion at
rated output

Less than
0.015%

Less than
0.03%

Power output of center amplifier

(STR-AV1070X only)

30 watts
(15 + 15 watts, 8 ohms at 1kHz)

Power output of surround(REAR)/
DRLC amplifier {8 ohms, at 1kHz)

15 + 15 watts

Frequency
response

PHONO

RIAA equalization curve ±0.5
dB

CD, DAT,
TAPE 1,2
VIDEO 1,2,3*

10 Hz —70kHz:"dB

Residual noise

Less than 70|iV

Damping factor

(8 ohms, at 1kHz)

50

Input sensitivity/
impedance

PHONO MM

2.5 mV, 50 kilohms

DAT,CD,
VIDEO 1,2,3*

TAPE 1,2

150 mV

50 kilohms

S/N

PHONO MM

87 dB
79 dB** (A,2.5mV)

DAT, CD
VIDEO 1,2,3*

TAPE 1,3

105 dB

85 dB** (A,150mV)

Output

DAT OUT,

TAPE OUT 1,2
VIDEO 1

150 mV
10 kilohms

SPEAKERS

Accepts seakers of 8-16 ohms

HEADPHONES Accepts headphones of high

and low impedance

CENTER OUT,
REAR OUT

2.5 V, Ikilohm

PRE OUT

1 V, IKilohm

MUTING

-20dB

DBFB

+ 10 dB (70 Hz)

Graphic Equalizer

7-band ±10 dB at 63Hz, 160
Hz, 400Hz,1kHz, 2,5 kHz, 6,3
kHz and 16 kHz

-STR-AV1070X only

-- 781HF

38

Advertising