Obtaining the surround effect, Available types of effects, Placement of speakers for dolby pro logic mode – Sony STR-AV1070X User Manual
Page 28: Normal mode, Wide mode, Phantom mode, 3ch mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Obtaining the Surround Effect
Available Types of Effects
HALL: Provides reverberation effect that is produced in a
concert hall.
SIMULATED: Gives a simulated stereo effect to monaural
sound.
DOLBY PRO LOGIC: The Dolby Pro Logic Surround
Decoder has the same functions for playback, such as
movie theaters and gives a theater-like experience in your
listening room, naturally reproducing the audio sound field.
Placement of Speakers for DOLBY PRO LOGIC Mode
NORMAL mode
WIDE mode
PHANTOM mode
NORMAL mode
When connecting smaller speakers than the front speakers,
such as that of TV for a center speaker.
WIDE mode
When connecting the same size speaker as the front
speakers for a center speaker.
PHANTOM mode
When connecting only front and rear speakers.
3CH mode
When connecting front speakers and a center speaker.
Center off mode
Set the receiver to this mode to turn off the center speaker.
Note
•
The amount of the DBFB effect varies according to the Dolby
Pro Logic mode.
•
For STR-AV1070X only:
When listening to the center speaker with another power
amplifier through the PRE OUT jacks, set the center speaker
level below -20 dB.
28