Changing the menu settings – Sony DCR-TR7000 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the MENU settings
Icon/item
Mode
Meaning
POWER
switch
HiH SOUND
• STEREO
To play .hack a stereo tape or dual sound track
tape with main and sub sound
VTR
1
To play back dual sound track tape with main
sound
2
To play back a dual sound track tape with sub
sound
AUDIO MIX
To adjust the balance between the stereo 1 and
stereo 2
II n
STl A. ST2
VTR
PB MODE
•
auto
To automatically select the system (Hi8/
standard 8 or DigitalS) that was used to record
on the tape, and play back the tape
VTR
HiB/a
To play back a tape Uiat was recorded in the
Hi8/standard 8 system when your camcorder
does not automatically distinguish the
recording system
B VF B.L
• BRT NORMAL To set the brightness in the viewfinder normal
VTR
BRIGHT
To brighten the viewfinder
■ CAMERA
Notes on AUDIO MIX
• You can adjust the balance only tor tapes recorded in the Digitals E) system.
• When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
Note on PB MODE .
The mode will return to the factory setting when:
• you remove the battery pack or power source.
• you turn the POWER switch.
Notes on VF B.L
•When you select "BRIGHT", battery life is reduced by about 10 percent during
recording.
• When you use power sources other than the battery pack, "BRIGHT" is automatically
selected.
54