Step 1 preparing the power supply, To remove the battery pack – Sony DCR-TR7000 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
step 1 Preparing the power supply
Install the battery pack to use your camcorder outdoors.
Slide the battery pack down.
To remove the battery pack
Slide the battery pack out in die direction of the arrow while pressing i ВАТТ
RELEASE down.
ВАТТ RELEASE
After installing the battery pack
Do not carry your camcorder by holding the battery pack If you do so, the battery pack
may slide off your camcorder unintentionally, damaging your camcorder.
Advertising