Required cords, 1 ch input hookups – Sony STR-DA333ES User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5.1 CH Input Hookups
Although this receiver incorporates a multi channel
decoder, it is also equipped with 5.1 CH INPUT jacks.
These connections allow vou to enjov multichannel
software encoded in formats other than Dolb^’ Digital
(AC-3) and DTS. If vour DVD player is equipped with
5.1CH OUTPUT jacks, vou can connect them directly to
this unit to enjoy the sound of the DVD player's multi
channel decoder. Alternatively, the 5.1CH INPUT jacks
can be used to connect an external multi channel decoder.
To fully enjov multi channel surround sound, vou will
need five speakers (two front speakers, two rear speakers,
and a center speaker) and a sub woofer. Refer to the
instruction manual supplied with your DVD player, multi
channel decoder, etc., for details on the 5.1 channel input
hookups.
Required cords
Audio cords (not supplied)
l\vo lor the 5.1CH INl’UT t^RONT and RtAR jacks
Monaural audio cords (not supplied)
Two for the 5.ICH INPUT CENTER and WOOFER jacks
Black czT~BlIO=
=czCgn=^ Black
Video cord (not supplied)
One for the DVD/LD VIDEO IN jacks (etc.)
DVD player.
Multichannel decoder, etc.
Yellow c=f~Bll::=r=
Yellow
Note
When
using
the
connections
described
below,
adjust
the
level
of
your
surround
speakers
and
subwoofer
from
the
DVD
player
or
multichannel decoder.
Example of a DVD player hookup using the 5.1 INPUT jacks
-[ ~j Front Speaker (L)
-{
[ Front Speaker (R)
Rear Speaker (L)
Center Speaker
Active Woofer
See page 14 for details on speaker system hookup.
10