Notes, Required cords – Sony STR-DA333ES User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connect the digital output jacks ot vour MD or DAT deck
to the receiver's digital input jack and connect the digital
input jacks ot your MD or DAT deck to the receiver's
digital output jack. These connections allow you to make
digital recordings ot CDs played back through your DVD
(or LD player) and satellite broadcasts.
Required cords
Optical digital cords (not supplied)
Black «diTlssa------- =
ssTlte Black
Audio cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
X
00
5'
ID
C
*o
T
o
n
0
3
■ o
0
3
(p
3
Notes
• Please note that you cannot make a digital recording of a digital multi channel surround signal.
• The DVD/LD OPTICAL and COAXIAL jacks are compatible with 32 kHz, 44.1 kHz, and 48 kHz sampling frequencies and 24 bit word
length.
• The TV/SAT OPTICAL IN jack and MD/DAT OPTICAL IN and OUT jacks are compatible with 32 kHz, 44.1 kHz, and 48 kHz sampling
frequencies and 16 bit word length.
• It is not possible to record analog signals to TAPE and VIDEO with only digital connections. To record analog signals, make analog
connections. To record digital signals, make digital connections.