Selecting a sound field, O' 5 – Sony STR-DA333ES User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Brief descriptions of buttons used to
enjoy surround sound
Selecting a Sound Field
CURSOR MODE button:
Press repeatecUv to light up the
SUR or EQ indicators to customize a sound field.
Cursor buttons
(♦ /♦ /♦ /♦ ): After pressing the CURSOR
MODE button or SET UP button, use these buttons to
make the actual setting.
GENRE button:
Press to select the desired sound field
group (genre).
SOUND FIELD ON/OFF button:
Turns the sound field on
or off.
MODE button:
Press to select the specific sound field
from the selected genre.
EQUALIZER button:
Turns the equalizer on or off.
You can enjoy surround sound simply by selecting one of
the pre-programmed sound fields according to the
program you want to listen to.
1
Press SOUND FIELD ON/OFF to turn on the sound
field.
The current sound field is indicated in the display.
2
Press GENRE repeatedly to select the sound field
group (genre), then press MODE repeatedly to
select the sound field you want.
See the table starting from page 28 for information on
each sound field.
? The receiver memorizes the last sound field selected for each
program source (Sound Field Link)
Whenever you select a program source, the sound field that was
last applied is automatically applied again. For example, if you
listen to CD with STADIUM as the sound field, change to a
different program source, then return to CD, STADIUM will be
applied again. With the tuner, sound fields are memorized
separately for AM, FM, and all preset stations.
Q
You can identify the encoding format of program software
by looking at its packaging
Dolby Digital discs are labeled with the logo and Dolby
Surround encoded programs will have the
logo.
m
3
o'
5'
<0
c
-«
o
c
3
a
fA
0
c
3
a
Note
When using sound fields, be sure to connect front speakers with a
nominal impedance of 8 ohms or higher if you want to select
both sets (A+B) of front speakers (see page 23). When you use
both sets (A+B) of front speakers, set the IMPEDANCE
SELECTOR to "4Q" (see page 15).
27