Note, 1 press tuner to light the button up, 2 press fm/am to select the fm or am band – Sony STR-DE725 User Manual
Page 34: 3 press direct tuning, Example 2: am 1350 khz, 6 repeat steps 2 to 5 to receive another station, Direct tuning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Brief descriptions of buttons used to
receive broadcasts
Direct Tuning
PRESET TUNING
+/-: Press to scan all preset radio
stations.
DIRECT TUNING:
Press this button to enter a frequency
directly using the numeric buttons.
^
Numeric buttons:
Press to enter a numeric value when
inputting the frequency directly, presetting radio stations,
or tuning to preset stations.
TUNING
+/-: Press to scan all available radio stations.
FM MODE:
If "STEREO ' flashes in the display and the
FM stereo reception is poor, press this button to improve
the sound. You will not be able to enjoy stereo effect but
the sound will be less distorted.
Note
If ' STEREO” does not appear at all even when the FM broadcast
Is received normally, press this button to turn on the "STEREO”
indication.
FM/AM:
Press to select the FM or AM band.
MEMORY:
Uses for memorizing preset stations.
SHIFT:
Press to select a memory page (A. 'B. or C) for
presetting radio stations or tuning to preset stations.
TUNER:
Selects the tuner.
For details on the buttons used in this section, see “Brief
descriptions of buttons used to receive broadcasts" on this
page.
1
Press TUNER to light the button up.
The last received station is tuned in.
2
Press FM/AM to select the FM or AM band.
3
Press DIRECT TUNING.
4
Press the numeric buttons to enter the frequency.
Example 1: FM 102.50 MHz
1
0
2
5
0
u * u * u * a * u
Example 2: AM 1350 kHz
fYou don't have to enter the last "O ')
U * U ' ^ U
If you cannot tune in a station and the
entered numbers flash
Make sure you've entered the right frequency. If not,
repeat Steps 3 and 4.
If the entered numbers still flash, the frequency is not
used in your area.
5
If you've tuned in an AM station, adjust the
direction of the AM loop antenna for optimum
reception.
6
Repeat Steps 2 to 5 to receive another station.
Q If you try to enter a frequency that is too precise for the
tuning scale
The entered value is automatically rounded up or down.
Tuning scale for direct tuning is:
FM: 50 kHz
AM: 10 kHz (to change to 9 kHz. see page 44.)
73
O
n
9
3
to
0
St
o.
n
SI
</l
35