Connecting a cable tv systenv antenna to a vcr, Connecting a vcr and projection, Tv to a cable box – Sony KP-61V90 User Manual
Page 14: To a cable box
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
•f
htstaUing and Connect«n-liv. fayection T¥ (continued)
Connecting a cable TV systenV
antenna to a VCR
1
Attach the coaxial cable from the
Incoming cable connection or antenna to
VHF/UHF IN on the VCR.
2
Using a coaxial cable, connect VHF/UHF
OUT on the VCR to VHF/UHF on the
projection TV.
3 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV iWhlte-AUDIO Left, Red-
AUDIO Right”).
Connecting a VCR and projection
TV to a cable box
1
Connect the single (Input) jack of the
splitter to the Incoming cable connection,
and connect the other two (output) jacks
(using the coaxial cable) to IN on the cable
box and VHF/UHF on the projection TV.
2
Using a coaxial cable, connect OUT on the
cable box to VHF/UHF IN on the VCR.
3
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right**).
1i
®
Disconnect all power sources before making any connections.
pi»r of projection T¥J