Sony KP-61V90 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Channel
Skip/Add
Skips
««¡iscssserK
cMmisSs.
Auto Program
AutomsSo
dwfiti^ pmssttiYi
Cable
Csfcis e^stsif?
ssSitig
Cha_nei Sk ji.iAiid
2
3 Adii
Adrf
3
A d rf
A d
A d li
Adii
7
e
▼ s
SolifCrf iWiannei
MoMfi ^ Salead g
After AUTO SET UP, you can erase unnecessary
channels from the channel preset memory.
With the Channel Skip/Add window open:
1 Press + or + to select the desired channel. You can
view the channel that is selected with the Channel
Skip/Add menu in the sub screen. You can also use
CH +/- or 0-9 and ENTER buttons.
2 Press
GD.
3 Press ♦ or + to select Skip, and press
GD.
The selected channel will be erased.
If you want to re-enter the skipped channel, follow the steps above and select
Add.
Select
Yes to signal the projection TV to automatically program all receivable
channels. When all the receivable channels are stored, the lowest numbered
channel is displayed.
Select No to cancel Auto Program.
Select
On if your projection TV is connected to a cable system.
Select
Off if your projection TV is connected to an antenna.
31