Step 2 : setting up the remote commander – Sony SLV-SE220B User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2 : Setting up the remote commander
Inserting the batteries
Insert two R6 (size AA) batteries
by matehing the + and - on the
batteries to the diagram inside the
battery eompartment.
Insert the negative (-) end first,
then push in and down until the
positive (+) end elieks into
position.
Using the remote
commander
You ean use this remote
eommander to operate this VCR
and a Sony TV. Buttons on the
remote eommander marked with a
dot (*) ean be used to operate your
Sony TV. If the TV does not have
the® symbol near the remote
sensor, this remote eommander
will not operate the TV.
Remote sensor
To operate
Set
|TV|
/
IMAGNI
to
the VCR
IMAGNI
and noint at the remote sensor at the VCR
a Sony TV
|TV|
and point at the remote sensor at the TV
12 Settinguptheremotecommander