To search a specific recording (index search), To stop searching, Searching using the index function – Sony SLV-SE220B User Manual
Page 62: Not available on slv-se220b)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Searching using the index function
(not available on SLV-SE220B)
The VCR automatically marks the tape with an index signal at the point where each
recording begins. Use these signals as references to find a specific recording.
To find a specific recording by scanning (Index scan)
^ Insert an indexed tape into the VCR.
2 Press ^M/^W (index search). The
VCR starts scanning each recording for
five seconds in the corresponding
direction.
2 Press (play) to start playback when you find the desired point.
To search a specific recording (Index search)
^ Insert an indexed tape into the VCR.
2 Press ^M/^W (index search) twice.
• To search ahead, press (index
search) twice.
• To search backwards, press (index
search) twice.
2 Press ^M/^W (index search) depending on the direction where your
desired programme is located.
Each time you press the button, the number increases or decreases up to
±20, respectively.
^ The VCR starts searching, and playback starts automatically from that
point.
To stop searching
Press ■ (stop).
62 Searching using the index function (not avaiiabie on SLV-SE220B)