Before you start editing, To stop editing, 70 b – Sony SLV-SE220B User Manual
Page 70: Basic editing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic editing
When recording on this VCR
Before you start editing
• Turn on your TV and set it to the video
channel.
• Press CHOIX ENTREE to display the
connected line in the display window.
• Press SP/LP to select the tape speed, SP or
LP.*
ENR •
^ O 1 I 6 o
O
X
^ Insert a source tape with its safety tab removed into the other (playback)
VCR. Search for the point to start playback and set it to playback pause.
2 Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press X (pause) to set it to
playback pause.
2 Press ENR 9 on this VCR to set it to recording pause.
^ To start editing, press the X (pause) buttons on both VCRs at the same
time.
To stop editing
Press the ■ (stop) buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press
X
(pause) on this VCR when an
unwanted scene begins. When it ends, press
X
(pause) again to resume recording.
* not available on SLV-SE220B
70 Basic editing