Sony STR-DB940 - Manual (Page 29)

01) Use these buttons to enjoy surround sound For
details, see "Enjoying Surround Sound" starting from
page 31
A F.D button / indicator
Press to set the receiver to automatically detect the
type of audio signal being input and perform proper
decoding (if necessary) For details, see "AUTO
FORMAT DECODING" on page 35
2CH button / indicator
Press to output sound from only the front (left and
right) speakers For details, see "2 CHANNEL" on
pate 35
MODE +/- buttons / indicator
Press repeatedly to select the sound field you desire
For details, see "Selecting a Sound Field" on page 32
• Sound fields are not compatible with 96 kHz digital audio
signals
03 ANLG DIREa button
Press to listen to an analog source without digital
processing by the equalizer, sound field, etc
For details, see "ANALOG DIRECT" on page 35
03 5 1CH INPUT button
Press to enjoy the audio source cormected to the 5 ICH
INPUT jacks Press 5 1 CH again to return to the
original function
• When 5 ICH INPUT is selected, the equalizer, bass boost,
and sound field effects do not function
011 DOOR OPEN button
Press to open the door on the front panel
01 ENTER button
Press to enter individual characters for the preset
station and program source names
03 Cursor buttons (</>)
Press to select various speaker level, surround, and
equalizer parameters (etc)
07) Jog dial
Turn to adjust the selected speaker level, surround,
and equalizer parameters (etc )
I LEVEL button
Press to activate the speaker level parameters (page
39) The indicator on the button lights up and you can
adjust the various speaker level parameters (front
balance, rear balance, etc )
I EQ button
Press to activate the equalizer parameters (page 40)
The indicator on the button lights up and you can
adjust the various equalizer parameters
I SUR button
Press to activate the surround parameters (page 38)
The indicator on the button lights up and you can
adjust the various surround parameters (effect level,
wall type, etc)
1 SET UP button
Press to activate the setup mode, then use the cursor
buttons (03) to select any of the following parameters
You can make various settings using the jog dial (07|)
When you select You can
Speaker setup Specify the front, center, rear speaker
sizes, the rear speaker position, and
whether or not you are using a sub
woofer (page 19)
Speaker Distance Specify the front, center, and rear speaker
distances and the unit of measurement
(page 21)
Crossover
frequency* Specify the front, center, and rear speaker
bass crossover frequency (page 22)
Auto Function Specify whether or not Sony components
connected via Control A1 cords will turn
on or off when selected using the
function buttons (page 53)
2 way remote
(STR-DB940 only)
Turn on or off response to remote
signals sent from the 2 way remote (page
53)
Color system
(STR-DB940 of area
codes other than
U, CA)
Select the TV color system of the monitor
OSD color
(STR-DB940 only)
Specify the color of the on-screen
display (page 54)
Dimmer Range Specify the display to turn off when you
press the DIMMER button several times
(page 54)
Only when the speaker is set to"SMALL" in the speaker setup
parameter
III
Д
in
fil
3
a
a
tt
M.
n'
>
3
•a
о
•a
29