Sony STR-DB940 - Manual (Page 84)

Downloading Data From the Receiver
3
la
ID
t~
To download CD disc names (memos) and
information on the presence or absence of a
CD in each siot of a CD changer
1 Move the easy scroll key to select "CD DISC
NAME," then press the key to enter the selection
The SORT menu appears in the display
<SORT? >
^NUMBER
ALPHPBET
2 Move the easy scroll key to select "NUMBER" or
"ALPHABET," then press the key to enter the
selection
The remote starts to download the data
<LOADING>
[III
CANCEL
To cancel the downloading process
Move the easy scroll key to select "EXIT" from the
DOWNLOAD list, then press the key to enter the
selection
Notes
• If you have changed the discs in the CD changer, be sure to
download the CD disc names (memos) from the receiver or
play the newly inserted disc(s) before you select a disc from the
changer
• You can download the data only from the Sony CD changer (5,
50, 200, 300, or 400 discs) connected to the receiver using the
CONTROL At cable
• CD DISC NAME is available for up to 400 discs when
COMMAND MODE is set to "CD 1" or "CD 2" When
COMMAND MODE is set to "CD 3", CD DISC NAME is only
available for 1 CD
Note on downloading OD disc names
^m the CD players
You can download CD disc names (memos) only from
the CONTROL Al/AlII-compatible Sony CD players
Depending on the CD player setting, it may take
several minutes to download CD disc names
(memos) For faster transmission, make the following
CD player settings
When an CONTROL A1/A1ii-compatible Sony
CD player is connected to the receiver
Check the following:
• The category for the CD function in the IR SET list is set to
"CDl "
♦ The category for all other functions in the IR SET list is not
set to "CD2 "
You can check the current category setting by selecting a
component from the function list (see page 14) Category
indication appears on the second column in the display
window
When multiple CONTROL A1/A1II-compatible
Sony CD players are connected to the receiver
when you use two CD players, set the COMMAND MODE
selector on the back panel of the CD players to "CDl" or
"CD2," respectively, and set the category in the IR SET list to
match the corresponding player's COMMAND MODE
selector position (see page 16) When you use three CD
players, set the COMMAND MODE selector to "CDl,"
"CD2," or "CD3," respectively, and set the category in the IR
SET list to match the corresponding player's COMMAND
MODE selector position
When setting category for the CD players, do not skip the
number or select the same number to the multiple players
When an CONTROL A1/A1II-compatible Sony
CD player and a non-compatible Sony CD
player are connected to the receiver
Set the COMMAND MODE selector on the back panel of the
CONTROL Al/Al II-compatible CD player to "CD2" and
set the category in the IR SET list for the player to "CD2"
(see page 16)
Set the COMMAND MODE selector on the back panel of the
non-compatible CD player to "CDl" and set the category in
the IR SET list for the player to "CDl" (see page 16)
Before downloading CD disc names (memos) from the
CONTROL A1 / A1II -compatible CD player, temporarily
change the category setting of the non-compatible CD player
to some other category ("VideoCD," for example) After
downloading is completed, set the category setting of the
non-compatible CD player to "CDl" again
When using a non-Sony CD player in
conjunction with Sony CD players
Program the remote to control the non-Sony CD player (see
page 16)
See the sections above for settings of the Sony CD players
20