Re-assembly procedure – Sony CMD-CD18 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
'*■
The LCD unit can be lifted out in
the way as follows:
1.
disconnect the flex cable
2.
unsolder the cushion
3.
release the LCD assembly
clips from the main board.
The
Vibra
Alert
unit
consisting
of
the
Vibra
motor,
Capacitor
and
the
flex
cable,
is
attached
to
the
shield
case.
It
is
removed
by
disconnecting
from
the
9pin
connector.
IMPORTANT; Do not detach the shield case from the main board
I
i^H
w$.
:1
i.
IB'
O
"X- i
■ ..-.o-'' ’• A. •’
Parts on the main board specified in the parts list can now be reached.
Re-assembly procedure :
To re-assemble the unit, apply the reverse order of the above mention disassembly procedure.
15