Note – Sony CMD-CD18 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Power requirements
Operating temperature
Accessories operating temperature
Battery pack charging temperature
Dimensions
Weight
Volume
Supplied accessories
Optional accessories
3.8 V (nominal)
-10°C to +55°C
± 0°C to +
4 5 0
C
± QOC to +4QOC
139 mm
X
45.5 mm x 26.5
139 g
1 2 0
cm3
Power adapter ;
ON-
ON-
QN-
QN-
QN-
Battery (std.)
Battery (extd.)
Cigar
Lighter
Charger
QN-
Travel Charger
QN-
Handsfree kit
QN-
EasyCom(SoftModem)QN
PC-Card
QN-
Headset
QN-
Desktop Charger
QN-
mm3
■2AC1 (AEP)
2AC2 (UK)
2AC3 (Australia)
CD5BPS
CD5BPE
2CC
2TC
CD5HFK
-2EC
2PCM
2HS
CD5DTC
Design and specifications are subject to change without prior notice.
This appliance conforms with EEC Directive 87/308/EEC regarding interference suppression.
NOTE
This
device
contains
electrostatic
sensitive
components.
Damage
can
occur
to
these
components
if the appropriate handling is not adhered to.
Handling precautions:
A working area where Digital Cellular Telephones may be safely handled without undue risk of
damage from electrostatic discharge, must be available.
The area must be equipped as follows:
>
All
working
surfaces
must
have
a
dissipative
bench
mat,
safe
for
use
with
live
equipment,
connected via 1.2Mi2 resistor to a common ground point.
>
A quick release skin contact device with a flexible cord, which has a built in safety resistor of
between
5.2MQ
and
1.2Mi2
shall
be
used.
The
flexible
cord
must
be
attached
to
a
dissipative earth point.
>
All containers and storage must be of the conductive type.
Batteries:
This
device
contains
an
internal
battery
in
addition
to
the
external
battery
packs.
These
batteries
are
recyclable
and
should
be
disposed
of
in
accordance
with
national
legislation.
They
must
not
be incinerated, or disposed of as ordinary rubbish.