Sony SAVA-500 - Manual (Page 11)

Home Theater Operations
To mute the sound
Press MUTING on the remote.
To restore the sound, press MASTER VOL + (or
MUTING on the remote again).
Notes
• Some videos and laser discs may support Dolby Pro Logic
Surround sound even if it is not indicated on the package.
• The surround modes do not operate when the 5.1-channel
input is selected-
Adjusting the Surround Sound
This speaker system is factory set to provide balanced
surround sound without the need for adjustment. You
can, however, adjust the volume of each speaker and
the delay time to suit the conditions of your living
room or vour individual tastes.
CENTER +/--
IcpjlQiCZl^
CD CD O-
CD CD CB-*-
CD CD
CD CD
CD CD ®
i©
- REAR +/-
■ T.TONE
DELAY
Adjusting the speaker volume
The test tone feature lets you adjust the volume of the
sound coming from each speaker to the same level, so
that the surround sound will be even and natural.
Make the following adjustments from your listening
position.
1
Select the surround mode you want to adjust.
2
Press T.TONE on the remote.
A test tone is output from each speaker in the
following order:
When you select PRO LOGIC or C.STUDIO
Front (Left) Center ^ Front (Right) ——
— R e a r t
When you select HALL, STADIUM or GAME
I ......^ Front ■
—— Rear M ■ ...........
When you select 5.1 CH IN
■ Front (Left) Center ^ Front (Right)*
— Rear (Left) •*- Rear (Right) *— ■"
(Continued)
11