Adjusting the delay time, Note, Setting the center mode – Sony SAVA-500 User Manual

Page 12: Home theater operations

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Home Theater Operations

Adjust the volume levels so that the test tone

from each speaker is at the same volume level

from your listening position:

To adjust the level

Press

of the center speaker*

CENTER + or -

of the rear speaker

REAR + or -

* The center speaker volume level cannot he adjusted

in the HALL, STADIUM, or GAME surround modes.

4 Press T.TONE on the remote to turn off the test

tone.

The adjustment levels for the selected mode are

stored in the memory.

Note

Pressing buttons other than MASTER VOL +/-,

CENTER +/-, or REAR +/- cancels the test tone.

Adjusting the delay time

Adjusting the delay time can enhance the spatial

characteristics of the sound to obtain a theater-like

presence regardless of the size of your room. If the

rear speakers are close to your listening position,

choose a longer delay time.

You can adjust the settings individually for PRO

LOGIC, C.STUDIO, HALL, STADIUM, and GAME.

Note

The delay time cannot be adjusted for the 3 STEREO (in FRO

LOGIC) mode.

1

Select the surrormd mode.

2

Play back a program.

3

Press DELAY on the remote once to display the

current delay time.

4

Press DELAY repeatedly to choose the delay time

you prefer, either 15, 20, or 30 ms.

The factory setting is 20 ms.

The delay time adjustment for the selected mode

is stored in the memory.

Setting the center mode

In PRO LOGIC or C.STUDIO surround mode, you can

choose from four different center modes; NORMAL,

WIDE, 3 STEREO, or PHANTOM. For normal use,

select NORMAL or WIDE mode. When you use the

supplied center speaker, we recommend using WIDE

mode.

To select the mode that you want, follow the

procedure below.

1

Press SURROUND on the operation panel to

choose PRO LOGIC or C.STUDIO.

2

Press CENTER MODE on the operation panel

repeatedly until the center mode you want

appears in the display.

12

Advertising