Sony SAVA-500 - Manual (Page 14)

Home Theater Operations
Operating Other Sony
Components
You can use the supplied remote to operate Sony
components, including TV set, VCRs, DVD players, LD
players, and CD players.
SYSTEM CONTROL-
l/(i)
Operation button-
CD
l«»|
;(3D CD CD
© 0
i© © ©i
!© © ©
jtS) © CS>
¡nn ZD ZD
CD ZD ZD
CZD CZJ CD
Q (ZJ Q
O O CD
CD O CD)
C D C Z ) Q
-1/6
■Function button
-MASTER VOL-
Before using the remote for your Sony
component
Table below shows the components that supports the
remote.
Function button Selectable component(s)
TV TV (set)
VIDEO VTR 1 (Beta deck), VTR 2
(8 mm deck), VTR 3 (VHS deck)
DVD DVD (player)
CD CD (player), LD (player), VTR 1 (Beta
deck), VTR 2 (8 mm deck), VTR 3
(VHS deck)
The TV button selects only the TV set and the DVD
button only the DVD player.
Use the VIDEO and CD buttons to select any of your
Sony components. The VIDEO button is factory-set to
VTR 3 (VHS deck) and CD button to a CD player.
To reassign these buttons, press the VIDEO or CD
button at the same time you press the button indicated
in the table below,
Press VIDEO and To select
MENU VTR 1 (Beta)
A (upward cursor button) VTR 2 (8 mm)
ENTER/EXECUTE VTR 3 (VHS)
Press CD and To select
< (leftward cursor button) CD (player)
V (downward cursor button) LD (player)
.MENU VTR 1 (Beta)
A (upward cursor button) VTR 2 (8 mm)
ENTER/EXECUTE VTR 3 (VHS)
To restore all settings to their factory-settings
Press both l/Cl) buttons on top of the remote together
with the MASTER VOL
All parameters saved in the remote are cleared and
restored to their factory settings.
Operating other Sony components
Do the procedure below to operate other Sony
components that you may own.
1
Press the function button on the remote of the
component to be used (TV, VIDEO, DVD, or CD).
The component that you selected is activated.
2
Operate the components with the operation
buttons.
Each operation button on the remote corresponds
to a basic operation on the Sony component.
For details on how to use each operation button, refer
to the Operating Instructions of the respective Sony
component.
V When you press an operation button
The function button of the respective component (TV,
VIDEO, DVD or CD) flashes to let you know what is
being operated. If you press an operation button that
has no corresponding operation on the Sony component
being used, none of the function buttons will flash.
Turning off other Sony components
1 Press the function button of the Sony component
you want to turn off.
2 Press SYSTEM CONTROL I/
6
.
The selected component enters standby mode.
14