Sony SLV-SE220D - Manual (Page 50)

'O ’© ’©
© © ©
© © ©
©
C L E A R
Q
Press the programme number
buttons to enter the ShowView
number.
If you make a mistake, press
CLEAR and re-enter the eorreet
number.
INPUT SELECT
o
C L E A R
Q
Press OK.
The date, start and stop times,
programme position, tape speed and
VPS/PDC setting appear on the TV
sereen.
• If “—” appears in the “PR”
(programme) eolumn (this may
happen for loeal broadeasts), you
have to set the appropriate
programme position manually.
Press M/m to seleet the desired programme position.
• To reeord from a deeoder or other souree eonneeted to one or
more of the LINE inputs, press INPUT SELECT to display the
eonneeted line in the “PR” position.
You will only have to do this operation onee for the referred
ehannel. The VCR will then store your setting.
If the information is ineorreet, press CLEAR to eaneel the setting.
If you want to ehange the date, tape
speed and the VPS/PDC setting:
1 Press </, to seleet the item
you want to ehange.
2 Press M / m to reset it.
• To reeord the same programme
every day or the same day every
week, see “Daily/weekly
reeording” on page 51.
• To use the VPS/PDC funetion, set
V/P to ON. For details about the VPS/PDC funetion, see “Timer
reeording with VPS/PDC signals” on page 51.
P R D A Y S T A R T - S T O P V / P
3 5 S A 2 9 1 9 : 0 ^ 2 0 : 0 0 s ^ o i
S E L E C T
E N D : O K
S E T : A T
E X I T : M E N U
O
Press MENU to exit the menu.
50 Recording TV programmes using the ShowView® system (not avaiiabie on SLV-SE620D/E)