Sony SLV-SE220D - Manual (Page 66)

Adjusting the picture
T R A C K I N G -
Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape, distortion may
occur if the recording is in poor condition. In
this case, manually adjust the tracking.
During playback, press PROGRAM +/- on
the VCR to display the tracking meter. The
distortion should disappear as you press one
of the two buttons. To resume automatic
tracking adjustments, eject the tape and re­
insert it.
Adjusting the picture sharpness (Smart trilogic)
You can automatically adjust the sharpness of the picture.
^ During playback, press MENU, then press M/f/</
USER SET and press OK.
2 P r e s s t o highlight SMART
TRILOGIC, then press ,.
Tracking meter
■ to highlight
O S D O N
T A P E S E L E C T E 1 8 0
C O L O U R S Y S T E M A U T O
F O R M A T 1 6 : 9 A U T O
N I C A M O N
P O W E R S A V E O F F
I S M A R T T R I L O G I C O N
S E L E C T S E T : ►
E N D : O K E X I T : M E N U
3 Press M/f to set SMART TRILOGIC to
ON or OFF.
• ON: Picture sharpness is automatically
adjusted.
• OFF: Adjust the picture sharpness
manually.
To soften the picture, press <.
To sharpen the picture, press ,.
^ Press MENU to return to the original screen.
■PIC
S M A R T T R I L O G I C : O F F
S O F T E N S H A R P E N
*
O N / O F F : A T S E T : ◄ ►
E N D : O K E X I T : M E N U
66 Adjusting the picture