Sony SLV-SE220D User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Example C
TV
Your VCR (Recorder)
^: Signal flow
m
a
3
(fi
How to connect to a stereo system (SLV-SE820D/E only)
Connect the t LINE-2 L o Rjacks on this VCR to the audio outputjacks
on the stereo system, using the RK-C510HG audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other
VCR, select the input correctly to prevent a humming noise.
• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-
2106HG cable instead and connect the cable to the line outjacks of the other VCR.
• When you connect another VCR to the LINE-3 (DEC/EXT)*
1
or LINE-2 (DEC/
EXT)*
2
connector, press INPUT SELECT to display “L3”*
1
or “L2”*
2
in the
display window.
*
1
SLV-SE820D/E only
*
2
SLV-SE727E, SX727D, SE720D/E, SX720D/E, SE620E and SE220D only
Connecting to a VCR or stereo system 71