Connecting and installing the tv (continued) – Sony KV-32V26 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting and Installing the TV (continued)
Disconnect all power sources before making any connection
Connecting a DBS (Direct Broadcast
Satellite) receiver
1
Connect the cable from your satellite antenna
to your DBS receiver.
2
Attach the coaxial connector from your cable or
anteima to VHF/UHF on your TV.
3
Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your DBS receiver
to AUDIO and VIDEO IN on your TV.
Connecting a DBS (Direct Broadcast
Satellite) receiver and a VCR
1
Connect the cable from your satellite antenna
to your DBS receiver.
2
Attach the-eoaxial connector from your cable or
antenna to VHF/UHF-IN on your VCR.
3
Using a coaxial connector, connect VHF/UHF-
OUT on your VCR to VHF/UHE on your TV.
4
Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your DBS receiver to
AUDIO and VIDEO IN on your VCR.
5
Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your VCR to
AUDIO and VIDEO IN on your TV.
VMC-810S/820S (not supplied)
(Rear of TV)
Note:
• To view input from the DBS or VCR, select VIDEO 1
by pressing TV/VIDEO on the remote control.
DBS receiver
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
VMC-810S/820S (not supplied)