Sony KV-32V26 - Manual (Page 29)

Pioneer 702
RCA 702, 709
Sanyo 706
Sharp 705
Yamaha 703, 708
Tips 'ij*'
In some rare cases, you may not be able to operate
your non-Sony video equipment with the supplied
remote control. In this case, please use the
equipment's ozon remote control.
The code numbers for Sony equipment are assigned at
the factory as follows:
VHS VCR
8 mm VCR
301 (preset code for
the supplied remote
control)
302
Beta, ED Beta VCRs 303
When you remove the batteries, the code number may
revert to the factory setting.
Operating a VCR Buttons on the
remote control
To turn on or off Press VTR (POWER).
To select a channel
directly Press the 0 - 9 buttons.
To change
channels Press CH +/-.
To record Press ► while pressing •.
First release ►, then
release •.
To play Press ►.
To stop Press ■.
To fast forward Press
To rewind the tape Press
To pause Press II.
To resume normal playback,
press again.
To search the
picture forward or
backward Press ►► or ◄◄ during
playback.
To resume normal playback,
release the button.
To change input
mode Press TVATTR.
Operating an MDP Buttons on the
remote control
To turn on or off Press VTR (POWER).
To play Press the ►.
To stop Press ■.
To pause Press II.
To resume normai
playback, press again.
To search the picture
forward or backward Keep pressing ►► or
during playback.
To resume normal
playback, release the
button.
To search the
chapter foro/ard or
backward Press CH +/-.
25