Connecting an antenna/cable tv system with a vcr, Connecting and installing the tv (continued) – Sony KV-32V26 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ml
Connecting and Installing the TV (continued)
Disconnect all power sources before making any connections.
Connecting an antenna/cable TV
system with a VCR
1
Attach the coaxial connector from your
cable or antenna to IN on your VCR.
2
Using AUDIO/VIDEO connectors, connect
AUE)lO and VIDEO OUT on your VCR to
AUDIO and VIDEO IN on your TV
(Yellow-VIDEO, White-AUDIO Left, Red-
AUDIO Right).*
3
Using a coaxial connector, connect OUT on
your VCR to VHF/UHF on your TV.
Connecting to an S Video equipped
VCR (for optimum picture quality)
1
Attach the coaxial connector from your
cable or antenna to IN on your VCR.
2
Using AUDIO connectors, connect AUDIO
OUT on your VCR to AUDIO IN on your TV
(White-AUDIO Left, Red-AUDIO Right).*
3
Using a coaxial connector, connect OUT on
your vCR to VHF/UHF on your TV.
4
Using an S VIDEO connector, connect
S VIDEO on your VCR to S VIDEO on
your TV.
* If you are connecting a monaural VCR, connect only
the single audio output to the left input on your TV.
Note on DVD Connection:
• For the best picture quality, connect the DVD player directly to the TV
Refer to your DVD manual for detailed connection information.
VCK must be connected and turned on to operate PIP
(KV-27S26, 27V26,29RS26,29R526C. 29V66M.3252S,
32TW26, 32V26. 34RS2SC, 35S26, 37RS2S only).
(Rear of TV)
Coaxial cable
VCR
Cable
OUT AUOCR AUOCL vceo SVIOTO
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
VMC-810S/820S (not supplied)
(Rear of TV)
S VIDEO
AUDIO-R (red)
AUDIO-L (white)
RK-74A (not supplied)