Connecting a vcr and cable box – Sony KV-36XBR400 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting a VCR and Cable Box
1
Installing the TV
Connect the single (input) jack of the splitter to your incoming
cable connection, and connect the other two (output) jacks (using
coaxial cable) to IN on your cable box and VHP / UHF on your TV.
2 Using a coaxial cable, connect the cable box's OUT jack to the
VCR's VHP/UHF IN jack.
3 Using an A/V cable, connect the VCR's A/V OUT jacks to the
TV's A/V IN jacks.
If your VCR has an S VIDEO jack; For best picture quality, use an S VIDEO connection
instead of the yellow video cable on your combined A/V cable. Using an S VIDEO cable,
connect the VCR's S VIDEO OUT jack to the TV's S VIDEO IN jack. S VIDEO does not
provide audio, so audio cables must still be connected to provide sound.
VCR
AUUOfi AUUOL VIDEO
■¿Si
rm
I
10