Setting up the tv automatically, Using the control s feature – Sony KV-36XBR400 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the TV
Using the CONTROL S Feature
CONTROL S allows you to control your TV system and other Sony
equipment with one remote control.
To control your other Sony equipment with your TV's remote control,
use a CONTROL S cable (not supplied) to connect the equipment's
CONTROL S IN jack to the TV's CONTROL S OUT jack.
TV
CONTROL S
IN OUT
OÌ
Setting Up the TV Automatically
After you finish connecting your TV, you need to run Auto Setup to
set up your channels.
^ The Auto Setup feature does not apply for installations that use a cable box for all
channel selection.
Using Auto Setup
1 Press POWER to turn on the TV.
The first time you turn on the TV, the Auto Setup screen appears.
2 Press
CH+
to run Auto Setup or press
CH-
to exit.
^ You can run Auto Program by seleaing it in the Channel menu, as described on
page 30.
18