Connecting two vcrs for tape editing – Sony KV-36XBR400 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the TV
Connecting Two VCRs for Tape Editing
If you connect two VCRs, you can use the TV's MONITOR OUT
feature to perform tape-to-tape editing. In the connection shown
below, the TV functions as a monitor and sends the program being
played by the playback VCR to the recording VCR.
1 Connect the VCFl intended for playback using the connection
instructions on page 10 of this manual.
2
Using A/V connectors, connect AUDIO and VIDEO IN on the
VCR intended for recording to MONITOR AUDIO and VIDEO
OUT on your TV.
^ You cannot record signals from equipment connected to the Y, P
b
, P
r
input.
VCR (playback)
AOWOR AUOIOL VIOeO
AUDIO-R(red)
-
AUDIO-L (white)
VIDEO (yellow)
A/V cable
A/V cable
To perform tape editing, set the TV to the video input intended for playback by pressing
the TV/VIDEO button on the remote control.
11