Sony CDX-C860 - Manual (Page 20)

Creating a program
— Program Memory (CD/MD changer with
the program memory function)
You can play tracks in the order you want by
making your own program. You can make two
programs: Program 1 and Program 2. You can
select up to 12 tracks for each program. You
can store the programs in memory.
1
Press ( SHIFT), then press (T) (PLAY
MODE) for two seconds.
Program edit mode
C D 2 oac IR«. v t t t i m t i f
2 3:P1.01:
Puer M00£ atjpl 1111 M 11 ^
"P 1” shows Program 1 is seiected.
If you have labelled the disc, the bank edit
mode appears. Press @ (PLAY MODE) to
display "P 1" above.
To select Program 2, press ® (—► )
repeatedly until "P 2" appears.
2 Select the track you want.
O Press (SOURCE) repeatedly to select
CD or MD.
O Press (MODE) repeatedly to select the
changer.
O Press (SHIFT), then press the number
button to select the disc.
O Press (SHIFT).
© Press either side of ( seek / ams ) to
select the track.
3 Press © (ENTER) momentarily.
Notes
• "* *Wait*" appears in the display while the unit is reading
the data, or when a disc has not been put into the unit.
• "*Mem Full*” appears in the display when you try to
enter more than 12 tracks into a program.
Playing the stored program
Changing the disc order in the changer will not
affect program memory play.
You can select:
•PGM 1 to play Program 1.
• PGM 2 to play Program 2.
•PGM 1+2 to play Programs 1 and 2.
1 Press
(SHIFT).
2 Press © (PLAY MODE) repeatedly until
"PGM" appears.
3 Press ® (—►) repeatedly until the
desired program appears.
I
—► PGM 1---------PGM 2 ------------ ► PGM 1+2
PGM off ◄ -
Program Play starts.
4 Press (SHIFT).
To go back to normal playback mode, select
"PGM off" in step 3 above.
Notes
•
If you press the number button during program memory
play, program memory play is interrupted, and playback
of the selected disc starts.
•
"NO Data” appears in the display if no track is stored in
the program.
• If a track stored into the program memory is not in the
disc magazine, the track will be skipped.
• When the disc magazine contains no tracks stored into
the program memory, or when the program information
has not been loaded yet, "Not Ready” appears.
PI
+Enter+
C D 2 I n I M M « /
3 2:P1.02:
w«« -» M I it n7o
4 To continue entering tracks, repeat steps
2 and 3.
5 When you finish entering tracks, press
@ (PLAY MODE) for two seconds. -
6 Press (SHIFT).
20