Sony CDX-C860 - Manual (Page 21)

Erasing an entire program
1 Press
CSHIFT),
then press ® (PLAY
MODE) for two seconds.
C D 2 TUCK
7:P1 .08,
"PI" shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press CD (PLAY MODE) to
display "P 1" above.
5
Press © (^) repeatedly until "DEL"
appears.
D E L '' " 'U l ’ i iy " " /
;—PGM 1 —^
♦ - l-W i iFidkl 1 1 1 1
6
To erase Program 2, press (3) (—► )
repeatedly until "PGM 2" appears.
3
Press CD (ENTER) for two seconds.
-f>1
NO Data
The entire program is erased.
4 When you finish erasing programs, press
CD (PLAY MODE) for two seconds.
5
Press (SHIFT).
Adding tracks to a program
1 Press (SHIFT), then press (D (PLAY
MODE) for two seconds.
C D 2 mo ^IIIIIПIM,
?jPl .08:
4 Press (D (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, "*Mem Full*"
appears in the displai/, and you cannot insert tracks.
CD (PLAY MODE) for two seconds.
6 Press
(SHIFT).
Erasing tracks in a program
1 Press (SHIFT), then press CD (PLAY
MODE) for two seconds.
C D 2 TPIACK I I M I I I / ^
2;P1 .0?:
-» E<TfcM I I I I I
"PI" shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press
(D (PLAY MODE) to
display "P 1" above.
To select Program 2, press
(3) (—►)
repeatedly until "P 2" appears.
2
Press CD (••—) or (3) (— ►) to select the
track you want to erase.
Track slot number
C D 2 ..........................y i l 'y
:3 3 PI .ii:
"P 1" shows Program 1 is selected.
The track currently registered in slot 6 of
Program 1.
EM
n
o
n
3"
3
ID
If you have labelled the disc, the bank edit
mode appears. Press CD (PLAY MODE) to
display "P 1" above.
To select Program 2, press CD (“*■)
repeatedly until "P 2" appears.
3 Press CD (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
D E L
--- PI.06
2
Press CD (••—) or CD (—►) to select the
track slot number where you want to
insert a track.
Track slot number
C D 2 ,
:3 2 PI .|H:
±1
__________ < T f i P i i T t i i W i m i i i i n >
3
Press either side of (
seek / am s
) to select
the track you want to insert.
C D 2 r.«;. ^UUIUM/,
7--P1 .06-
4 To continue erasing tracks, repeat steps
2 and 3.
5 When you finish erasing tracks, press CD
(PLAY MODE) for two seconds.
6 Press CsHirn.
21