Sony MDS-S35 - Manual (Page 25)

Additional Information
IM.A3 MOni- wiis prossod
while the deek is stopped, cind
eontiiUKuis (normcil) pKw
iiKKle hcis been seleeted (.Ine shiM’t beep (kn\’)
(cancelling Shuffle or
Programme Tlav miKle).
bI3[T/NO was pressed while
the deck is stopped, and "All
hrase i*" has appeared in the
displa\'.
One short beep (high)
TDII ,/NCO was pressed while
the deck is recording, and
"l,e\'elS\ nc ?" has appeared in
thedis^v'^A - C)ne short beep (high)
kDI I / NO was pressed while
the deck is playing, and
"Hrase ?" has appeared in the
display.
One short beep (high)
One beep for cncli 10 minutes of remaining time (e.g., one
beep for 10 to 20 minutes, two beeps for 20 to 30 minutes,
and three beeps for 30 to 40 minutes. No beep is output for a
remaining time of 10 minutes or less.
' This beep is output onlv through the headphones; no beep is
output from the deck.
Guide to the Serial Copy
Management System
Tliis MI5 dock uses tlio Serial Copy Mangomont System
which allows onlv a first-generation digital copy to he
made of prerecorded software via the MD deck's
digital input/output jacks. An outline of this system
appears below:
1 You can record from digital progiamme sources (CDs,
prerecorded MDs, and DAT equipment with a sampling
frequency of 44.1 kHz) onto a recordable VID via the MD
deck's digital input jack. You cannot, however, record
from the recorded MD onto another recordable MD via
the MD deck's digital output jack.
CD player DAT deck
MD deck
Playing
Optical cable
Recording
Digital output jack
Digital input jack
MD deck
A recordable MD
recorded through the
digital input jacks
Playing
Digital
output jack
Optical cable
Digital
input jack
Recording
MD deck
MD deck
Line (analogue)
output jacks
Audio connecting
cord
Line (analogue)
Input jacks
Note
There are no copy generation restrictions on recording
between two VID decks connected via their respectix'e
analogue input/output jacks.
27