Using the tv speakers as center speakers – Sony KV-32XBR45 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Using the TV speakers as center speakers

This feature allows you to enjoy the benefits of Dolby
Pro Logic by using the speakers of the TV as the center
speaker. To utilize this system you must have an
amplifier that is Dolby Pro Logic compatible. Connect
the speaker wires from the amplifier's center channel
output terminals to the TV's CENTER SPEAKER IN
terminals. Both right and left terminals must be
connected to receive an audio signal. After making the
above connections select "SPEAKER : CENTER" from
the AUDIO menu (page

22).

The left and right audio

channels can be heard through your audio system

speakers. Please note that in this set up the volume can
only be adjusted by your amplifier.

Notes

• Always match the speaker cord and terminal colors when

making the connections.

• Unplug the TV when making the connections. If the exposed

speaker cord wires touch while the TV is plugged in, the TV
may short-circuit and be damaged.

• Do not pull on the speaker cords.
• Always turn off the amplifier power before connecting to

CENTER SPEAKER IN.

• Always match the speaker cord and terminal colors when

making the connection.

(Rear of TV)

Manufactured under license from Dolby Laboratories
Licensing Corporation. Additionally licensed under one or
more of the following patents; U.S. numbers 3,632,886,
3,746,792 and 3,959,590. "Dolby" and the double-D symbol □□
are trademarks of Dolby Laboratories Licensing Corporation.

Connecting other Sony equipment with CONTROL S jack

This feature allows you to control your TV and other
Sony components with one remote control. You can
either control the TV with a remote control from a Sony
component or control the Sony component with the
TV's remote control. The connections for the above
options are described below.

• To control other Sony equipment with the TV's

remote commander, coimect the input of the
equipment to CONTROL S OUT jack on the TV.

• To control the TV with the remote commander of

other Sony equipment, connect the output of the
equipment to CONTROL S IN jack on the TV.

(Rear of TV)

11

Advertising