Sony KV-32XBR45 - Manual (Page 5)

Getting Started
Step 1:
Connections Connecting an antenna/cable TV
system without a VCR
Cable or antenna
Cable
(Rear of TV)
VHF/UHF
Either an indoor antenna or outdoor antenna should be
used with your TV. However, we recommend that you
connect an outdoor antenna or a cable TV system to get
better picture quality.
To access AUDIO/VIDEO jacks and AC cord on KV-
32XBR85, remove the back panel (see page
9).
How to connect different types of
cables
The illustrations below show the examples of
connecting different types of cables to the TV directly.
• VHF
only
or
• VHF/
UHF
or
• Cable
75-ohm coaxial cable
(Rear of TV)
VHF/UHF
Cable box
If your cable company requires you to connect a cable
box, make the connection as follows:
(Rear of TV)
VHF/UHF
Cable box
Cable box and cable
(Rear of TV)
AUX
75-ohm coaxial cable
(not supplied)
CATV cable
TO
CONVERTER
VHF/UHF
B
■ VHF only
or
> UHF only
or
> VHF/UHF
300-ohm twin lead cable
Antenna connector
(not supplied)
75-ohm coaxial cable
■ VHF
and
■ UHF
(Rear of TV)
VHF/UHF
(Rear of TV)
VHF/UHF
EAC-66 U/V mixer
(not supplied)
300-ohm twin lead cable
Pay cable TV systems use scrambled or encoded signals
requiring a cable box* in addition to the normal cable
connection.
* The cable box will be supplied by the cable company.
Note
• You cannot watch the signal through AUX connector as a
window picture.
Cable and antenna
CATV cable
(Rear of TV)
AUX
TO
CONVERTER
Notes
• Most VHF/UHF combination antennas have a signal splitter.
Remove the splitter before attaching the appropriate connector.
• If a U/V mixer is used, snow and noise may appear in the
picture when viewing cable TV charmels over 37.
Antenna cable
VHF/UHF
Note
• Do not connect anything to the TO CONVERTER connector in
this case.
Getting Started