4 erase and/or add the channel you want, 6 when you finish, press menu, Setting cable tv on or off – Sony KV-32XBR45 User Manual
Page 15: 1 press menu, 3 set cable to on or off, 4 press menu to return to the normal screen
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
Press + 4 or - ♦ to move the cursor (P-) to
CHANNEL ERASE/ADD and press RETURN.
c±^0
©CHANNEL
ERASE/ADD
10
►ERASE
ADD
:>MENU
Select the
channe1
Use ill! MW
Exit KiiJj
4
Erase and/or add the channel you want:
(1) Press + 4 or - ♦ and press RETURN to select
ERASE or ADD.
c±sO
©CHANNEL
ERASE/ADD
10
ADO
PMENU
Select the
channel
Use UU MW
Exit IMJ
(2) Press CH +/- or 0-9 buttons to select the channel
you want to erase or add.
Selected channel number
(R
etu
^Q
0
©CHANNEL ERASE/ADD]
►ERASE
ADD
^MENU
Select the channe
Use Ull 5WN] Exit iiiyj
(3) Press RETURN.
• If you selected ERASE in step ( 1 ) , a p p e a r s
beside the channel number, showing that
channel is erased from the preset memory.
• If you selected ADD in step (1),"+" appears
beside the channel number, showing that
channel is added to the preset memory.
5
To erase and/or add other channels, repeat
step 4.
6 When you finish, press MENU.
Notes
• If you erase or add a VHP or UHF channel, the cable TV
channel with the same number is also erased or added.
• Erasing and adding channels is also available for the AUX
input.
Setting cable TV on or off
This setting allows you to view either broadcast or cable
signals. The factory setting for cable TV is ON. If you
do not desire to view cable TV, you must turn it off as
shown below.
You do not have to do this procedure if you execute
AUTO SET UP (page
14).
Do this procedure only when
you want to set it manually.
1
Press MENU.
2
Press
4
+ or
4
- to move the cursor
(P-)
to
SET UP and press RETURN.
The SET UP menu appears.
CrnQ
(
return
I ^
CH5
©SET UP
►CHANNEL ERASE/ADD
CHANNEL CAPTION
CHANNEL GUIDE
VIDEO LABEL
CABLE. ON
AUTO PROGRAM
LANGUAGE:ENGLISH
:>MENU
Use illl MW Exit M
If you are in one of the video modes, the CABLE
lettering will be black on the menu. To display the
CABLE lettering you must press TV on the remote
control until a channel number appears on the
screen.
3
Set CABLE to ON or OFF:
(1) Make sure the cursor (► ) is beside CABLE and
press RETURN.
GtSO
C
■
(RETURN|((y
O
(2) Press 4 + or 4 - to select ON or OFF and,
sao
(3) press RETURN.
(PgTUfWlQ
n
©SET UP
►CHANNEL ERASE/ADD
CHANNEL CAPTION
CHANNEL GUIDE
VIDEO LABEL
CABLE:
OFF
AUTO PROGRAM
LANGUAGE:ENGLISH
:>MENU
Use Ull MW Exit
4
Press MENU to return to the normal screen.
(
menu
~]
Getting Started
15