Inserting a scene – Sony DCR-TRV315 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Inserting a scene
You can insert a scene in the middle of a recorded tape by setting the start and end
points. The previously recorded frames between these start and end points will be
erased. Use the Remote Commander for this operation.
^ [a] [b]
»
I#
>
?
(1)
While your camcorder is in the standby mode, keep pressing EDITSEARCH,
and release the button at the insert end point
[bj.
(2)
Press ZERO SET MEMORY. The ZERO SET MEMORY indicator flashes and
the tape counter resets to zero.
(3)
Keep pressing the - @ side of EDITSEARCH and release the button at the
insert start point
[a].
(4)
Press START/STOP to start recording. The scene is inserted. Recording stops
automatically at the tape counter zero point. Your camcorder returns to the
standby mode.
•■ I
o
T!
EDITSEARCH
* •
Notes
•The zero set memory function works only for tapes recorded in the DigitaS H system.
• The picture and the sound may be distorted at the end of the inserted section when it
is played back.
If you re-record on the section which contains a non-recorded section
The zero set memory function may not work correctly.
When START/STOP MODE is set to
±
or 5SEC
You cannot use the zero set memory function.
41