Sony DCR-TRV315 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Quickly locating a scene using the zero
set memory function_________________
Your camcorder goes forward or backward to automatically stop at a desired scene
having a tape counter value of "0:00:00". Use the Remote Commander for this operation.
Use dis function, for example, to view a desired scene later on during playback.
(1)
In the playback mode, press DISPLAY.
(2)
Press ZERO SET MEMORY at the point you want to locate later. The tape
counter shows "0:00:00" and the ZERO SET MEMORY indicator flashes.
(3)
Press ■ when you want to stop playback.
(4)
Press to rewind the tape to the tape coimter's zero point. The tape stops
autonaatically when the tape counter reaches approximately zero. The ZERO
SET MEMORY indicator (disappears and the time code appears.
(5)
Press ►. Playback starts from the tape counter's zero point.
DISPLAY
ZERO SET MEMORY
Notes
• The zero set m«nory function works only for tapes recorded in the DigitalS O system.
• When you piess 2XRO SET MEMORY before rewinding the tape, the zero set memory
function will be canceled.
• There may be a discrepancy of several seconds from the time code.
• The zero set memory function may not work when there is a blank portion between
pictures on a tape.
44