To cancel time edit, You can program the tracks you want in advance, You can freely specify the tape length – Sony CDP-CE215 User Manual

Page 15: Q' you can check and change the program, Fading in or out, Note, Fading out at the specified time, Time fade) (cdp-ce315 and cdp-ce215, Only), Cdp-ce315 and cdp-ce215 only)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Recording From CDs

7

When you record on side B, reverse the tape and

press t> or

I I

on the player to resume playing.

To cancel Time Edit

Press CONTINUE.

You can program the tracks you want in advance

Select the tracks before doing the above procedure. The

player creates a program from the remaining tracks.

You can freely specify the tape length

Set the tape length using the 11« AMS OM control.

Example: When the tapie length of one side is 30 minutes

and 15 seconds

1 To set the minutes, turn IKW AMS OOO until

"30" appears in the display, then push

0« AMS I>C>I1.

2 To set the seconds, turn KKl AMS t>C>ll until

"15" appears in the display, then pu.sh

KM AMS t>l>ll.

■Q' You can check and change the program

See page 13.

Fading In or Out

You can manually fade in or out to prevent tracks from

starting or ending abruptly.

Note that you cannot use this effect when you use the

DIGITAL OUT (OPTICAL) connector.

O i l

To

Press FADER

Start play fading in

During pause, f ”” 1 lights up in
the display and the -'i| indication
flashes. The play fades in.

End play fading out

When you want to start fading out.

lights up in the display and

the I»' indication flashes. The play
fades out and the player pauses.

Note

Fading lasts for about 5 seconds. However, when you press

the FADER button during Music Scan (see page 10), the play

fades out for about 2 seconds.

Fading out at the specified time
(Time Fade) (CDP-CE315 and CDP-CE215
only)

You can have the player fade out automatically by

specifying the playing time. Once you set the Time

Fade, it works twice, that is, the play fades out at the

end of both sides of a tape.

Press EDIT/TIME FADE repeatedly before you

start playing until

and "A" in the [

0

/

0

]

indication appear in the display.

2

Press or ►► to specify the playing time.

Each time you press these buttons, the display

changes as shown below, with the playing time of

one side following each indication.

. C-46

(23.00)

. C-54 »-

(27.00)

. C-60

(30.00)

. C-74 -

(37.СЮ)

. С-Ч0 -

(45.00)

(Continued)

15

EN

Advertising
This manual is related to the following products: