Sony CDP-CE215 - Manual (Page 9)

Playing CDs
Replacing Discs While Playing
a Disc
You can open the disc tray while playing a disc so that
you can check what discs are to be played next and
replace discs without interrupting playback of the
current disc.
1 Press EX-CHANGE.
The disc tray opens and two disc compartments
appear. Even if the player is playing a disc, it
doesn't stop playing.
2 Replace discs in the compartments with new ones.
The player plays the disc on the left side
compartment after the current disc, and then the
one on the right side compartment.
3 Press DISC SKIP.
The disc tray turns and other two «disc
compartments appear.
4 Replace discs in the compartments with new ones.
5 Press EX-CHANGE.
The disc tray closes.
While the disc tray is open by pressing the EX-CHANGE
button
• If the playback of the current disc ends, the player stops
playing. If the disc is played in 1 DISC Repeat Play mode
(see page 11), the current disc starts playing again.
• In ALL DISCS Shuffle Play mode (see page 11), tracks are
reshuffled on the current disc.
• In Program Play mode (see page 12), only the tracks on the
current disc are played.
• Do not push the disc tray to close it in Step 5, as you may
damage the player.
Locating a Specific Disc
You can locate any disc before or while playing a disc.
‘CDP-CE315 and CDP-CE215 only
To locate Press
The next disc DISC SKIP while playing a disc
A specific disc directly DISC 1 - 5
A disc while checking the
labels (CDP-CE313and
CDP-CE215only) DISC CHECK while the disc
tray is open. The disc tray turns
to show you each disc label.
When the disc you want comes
in front of you, press t> to
start playing.
A disc by scanning the first
track of each disc for 10
seconds (CDP-CE315 and
CDP-(iE215 only) DISC CHECK before you start
playing while the disc tray is
closed. When you find the disc
you want, press t> to start
playing.
'Ô' You can extend the playing time during scanning the
discs
Press DISC CHECK repeatedly until the playing time
you want (10, 20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Notes
• When you press the DISC CHECK button, the play mode
automatically changes to ALL DISCS Continuous Play
mode.
• When you've opened the disc tray by pressing the
EX-CHANGE button, you carmot use the DISC CHECK
function.
• Even if you press the DISC CHECK button while
"REPEAT" appears in the display (see page 11), the player
stops after scarinihg all The discs once.
\ E N