Inserting a cassette, To eject the cassette, To prevent accidental erasure – Sony CCD-TR714 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting a Cassette
Make sure that a power source is installed.
(
1
)
While pressing the small blue button, slide EJECT in the direction of the arrowc The cassette
compartment automatically opens.
(
2
)
Insert a cassette (not supplied) with the window facing out.
(3) Press the PUSH mark on the cassette compartment to close it. The cassette compartment
automaticallv closes.
To Eject the Cassette
While pressing the small blue button, slide EJECT in the direction of the arrow.
To Prevent Accidental Erasure
Slide the tab on the cassette to expose the red mark.
If you insert the cassette with the red mark exposed and close the cassette compartment, the beeps
sound for a while. If you try to record with the red mark exposed, the [B^ and
it
indicators flash in
the vnewfinder, and you cannot record.
To re-record on this tape, slide the tab back out covering the red mark.
10