Checking the recorded picture, To begin re-recording – Sony CCD-TR714 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Checking the Recorded Picture
Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the
viewfinder.
(
1
)
While pressing the small green button on the POWER switch, slide it to CAMERA.
(2) Turn STANDBY up.
(3) Press EDITSEARCH. Press the - (S)) side momentarily, the last few seconds of the recorded
portion plays back (Rec Review).
Hold down the - side of EDITSEARCH until the camcorder goes back to the scene you want. The last
recorded portion is played back. To go forward, hold down the + side (Editsearch).
To Begin Re-recording
Press START/STOP. Re-recording begins from the point you released EDITSEARCH. Provided you
do not eject the cassette, the transition between the last scene you recorded and the next scene you
record will be smooth.
16