Getting started, Charging and installing the battery pack, Charging the battery pack – Sony CCD-TR714 User Manual
Page 6: Charging time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started]
Charging and Installing the Battery Pack
Before using your camcorder, you first need to charge and install the battery pack. To charge the
battery pack, use the supplied AC power adaptor.
Charging the Battery Pack
Charge the battery pack on a flat place without vibration.
(
1
)
Connect the AC power adaptor to the wall outlet.
(2) Align the right side of the battery pack with the line on the AC power adaptor, then slide the
battery pack in the direction of the arrow.
(3) Set the selector to CHARGE. The CHARGE lamp (orange) lights up. Charging begins.
When charging is completed, the CHARGE lamp goes out. Unplug the unit from the mains, and then
remove the battery pack and install it on the camcorder.
Charging Time
Battery pack
NP-33
(supplied)
NP-98/98D NP-80/80D NP-68/66H
NP-66
NP-C65
NP-60D
Charging
time*
60
215
190
125
95
105
90
* Approximate minutes to charge an empty pack using the supplied AC power adaptor (Lower
temperatures require a longer charging time.)